manualshive.com logo in svg

allen TRTP75, Инструкция по безопасности и эксплуатации, Страница: 26 / 48

Поделиться
Скачать
allen TRTP75 Скачать руководство пользователя страница 26

SECTION 1

SAFETY

075707

Page 26

Lifting Safety

•  When lifting the machine, all personnel must be clear of the machine.

•  DO NOT

 stand near or under the machine while it is being lifted.

Lifting instructions using a hoist:

•  A lifting harness is shipped with the machine, but it is available for purchase if a replacement is needed. Part 

number 075041 is for the Shackle and 075042, 075043, 075044 are for the straps, which are 10’, 12’ and 14’ 
respectively. Different machine sizes will require different lifting straps to stay balanced. See Accessories on page 
44.

•  Place straps, chains, or hooks through each lifting point on the machine. Use straps or chains connected to a central 

lifting device. Ensure that all lifting devices have sufficient weight-bearing capacity.

•  ALWAYS

 shutdown the engine before transporting.

•  Avoid sharp bends, pinching, and crushing. Use loops and thimbles at all times. Ensure that the straps are protected 

from sharp corners.

•  Never wrap a strap around a hook
•  Avoid bending near any splice or attached fittings
•  Ensure that the 

strap’s angle

 is always greater than 45° and preferably greater than 60°.

Lifting Points

Содержание TRTP75

















































Отзывы:

Нет отзывов