allen TRTP75 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 48

allen TRTP75 Скачать руководство пользователя страница 19

SECTION 1

SAFETY

075707

Page 19

Manual Tag Safety Detail

Safety-Alert Signs

This manual contains Safety-Alert Signs, as defined below, which must be followed to reduce the

possibility of improper servi ce damage to the equipment or personal injury. Read and follow all Safety-

Alert Signs included in this manual.

NOTE

defines an operating procedure, condition, etc. which is essential to

highlight that contains useful or important information.

EMERGENCY

is used for the identification of safety equipment, first aid, or

emergency egress locations.

NOTICE

used to convey safety information on labels and signs.

CAUTION

is indicative of a potentially hazardous situation which, if not avoided,

may result in minor or moderate injury.

WARNING

Indicative of a potentially hazardous situations that could result in

death or serious injury

DANGER

indicates an imminently hazardous situation which, if not avoided, will

result in death or serious injury.

«
...
17
18
19
20
21
...
»

Содержание TRTP75

















































Отзывы:

Нет отзывов