allen TRTP275 Скачать руководство пользователя страница 69 | Manualshive

Страница: 69 / 170

allen TRTP275 Скачать руководство пользователя страница 69

09/2018 - 275

Page 69

SECTION 3

SERVICE

Filter Replacement

Pre-Fuel Filter

Step Activity

1.  Lock the fuel supply line on the fuel prefilter.
2.  Place a suitable container under the filter to collect emerging fuel.
3.  Disconnect the water level sensor cable (4) from the drain plug (3).
4.  Release the drain screw (3) and drain the fuel.
5.  Unscrew the fuel prefilter. Completely unscrew the drain plug with integrated water level sensor
6.  Dispose of the used fuel prefilter according to local environmental regulations.
7.  Clean the drain plug with integrated water level sensor and lightly oil the sealing surfaces. Screw the drain plug into

the new fuel prefilter.

8. Lightly oil the gasket (6) of the new fuel prefilter, fit the dry filter and tighten it by hand.
9. Release the fuel feed line and connect the cable of the water level sensor.
10. Start the engine and perform a test run.
11. After the test run, check the fuel prefilter and drain plug for leaks, tighten by hand if necessary.

PRE-FUEL FILTER PART NUMBER: 065851

«
...
67
68
69
70
71
...
»

Содержание TRTP275











































































































































































Отзывы:

Нет отзывов