allen TRTP275 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 170

allen TRTP275 Скачать руководство пользователя страница 32

275 - 09/2018

Page 32

SECTION 1

SAFETY

•

ALWAYS

recharge the battery in a well-ventilated environment to avoid the risk of a dangerous concentration of com

-

bustible gases.

• If the battery liquid (dilute sulfuric acid) comes into contact with
clothing or skin, rinse skin or clothing immediately with plenty of water.

• If the battery liquid (dilute sulfuric acid) comes into contact with eyes, rinse eyes immediately with plenty of water and
contact the nearest doctor or hospital to seek medical attention.

•

ALWAYS

disconnect the negative battery terminal before performing service on the equipment.

•

ALWAYS

keep battery cables in good working condition. Repair or replace all worn cables.

• Side slope operation is not permitted.

• Walk around the riding trowel before starting it to see if any items are worn, damaged, leaking, etc. that may make the
riding trowel dangerous to operate.

• Stop and inspect the equipment if you strike an object. If necessary, make repairs before restarting.

•

ALWAYS

check that all controls are functioning properly immediately after start-up!

•

DO NOT

operate machine unless all controls operate correctly.

General Safety (cont’d)

«
...
30
31
32
33
34
...
»

Содержание TRTP275











































































































































































Отзывы:

Нет отзывов