allen RS844 Скачать руководство пользователя страница 7

Страница: 7 / 130

057625 - 10/2012

Information Contained in this

Manual

This manual provides information and procedures to safely operate and maintain the Allen Machine.

For your own safety and protection from personal injury, carefully read, understand, and observe the

safety instructions described in this manual. Keep this manual or a copy of it with the machine at all

times.

Always operate this machine in accordance with the instructions described in this manual. A well main

tained piece of equipment will provide many years of trouble free operation.

This manual is divided into the following sections:

SECTION 1

SAFETY

SECTION 3

SERVICE

SECTION 2

OPERATIONS

SECTION 4

PARTS

Complete any warranty requirements as specified by the engine manufacturer in their instructions

found inside the manual box located on the operator’s control panel.

Your engine is not manufactured by Allen Engineering Corporation, Inc, and therefore is not covered

under Allen Engineering Corporation, Inc warranty.

Your engine manufacturer should be contacted if you wish to purchase a parts manual or a repair

manual for your engine.

Refer to enclosed owners engine manual for complete O&M instructions. See your battery manufac

turer for battery warranty.

Page v

Содержание RS844



































































































































Результаты поиска

Содержание RS844

Отзывы:

allen RS844, Руководство по эксплуатации и запасным частям, Страница: 7 / 130

Результаты поиска

Содержание RS844

Отзывы: