manualshive.com logo in svg

allen RS844, Руководство по эксплуатации и запасным частям, Страница: 44 / 130

Поделиться
Скачать
allen RS844 Скачать руководство пользователя страница 44

057625 - 10/2012

SECTION 3

SERVICE

Page 3-6

3.5 Battery and Charging System

Mishandling of the battery shortens its service life and adds to maintenance cost.

 

1. Check and clean battery terminals for corrosion often.

 

2. Check the battery regularly and make sure that each electrolyte level is to the bottom of   

 

 

the vent well. If necessary, add only distilled water in a well ventilated area. Never operate  

 

 

or recharge without sufficient fluid in the battery.

 

3. Never attempt to charge a battery that is frozen. The battery can explode unless first al-

 

lowed to thaw.

 4. 

ALWAYS

 be sure that the battery cables are properly connected to the battery terminals as    

 

shown below. Generally the 

RED

 cable will be connected to the positive terminal of the battery,  

 

and the 

BLACK

 cable will be connected to the negative terminal of the battery.

 

5. Disconnect the negative terminal ( - ) of the battery during storage. If unit will be stored  

 

 

where ambient temperature will drop to -15° C or less, remove and store battery in a warm, dry  

 place.

Содержание RS844



































































































































Отзывы:

Нет отзывов