allen RS844 Скачать руководство пользователя страница 18

Страница: 18 / 130

057625 - 10/2012

SECTION 1

SAFETY

Page 1-4

1.1 Safety Information

Do not operate or service the equipment before reading the entire manual. Safety precautions should

be followed at all times when operating this equipment. Failure to read and understand the safety mes-

sages and operating instructions could result in injury to yourself and others.

SAFETY NOTES

The four safety notes shown below will inform you about potential hazards that could injure you or oth-

ers. The safety notes specifically address the level of exposure to the operator and are preceded by

one of four words: DANGER, WARNING, CAUTION or NOTICE.

Indicates a hazardous situation which, if not avoided,

will

result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could

result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Addresses practices not related to personal injury.

Содержание RS844



































































































































Результаты поиска

Содержание RS844

Отзывы:

allen RS844, Руководство по эксплуатации и запасным частям, Страница: 18 / 130

Результаты поиска

Содержание RS844

Отзывы: