manualshive.com logo in svg

allen PRO WALK-BEHIND, Руководство по эксплуатации и запасным частям

Поделиться
Скачать
allen PRO WALK-BEHIND Скачать руководство пользователя страница 32

2.2.1   Pre-Start  Procedures

Gearbox Oil

1.  Determine if the gearbox oil is low by removing the oil plug located on the side of the gearbox. The correct level of the 

lubrication oil should be to the bottom of the fill plug.

2.  If lubrication oil begins to seep out as the drain plug is being removed, then it can be assumed that the gearbox has 

a sufficient amount of oil.

3.  If lubrication oil does not seep out as the drain plug is being removed, fill with type Allen Oil Kit P/N 048386 gearbox 

lubricant oil until the oil filler hole overflows.

V-Belt Check

1.  A worn or damaged V-belt can adversely affect the performance of the trowel. If a V-belt is defective or worn simply 

replace the V-belt as outlined in the maintenance section of this manual.

Belt Guard Check

1.  Check for damage, lose or missing hardware.

Blade Check

1.  Check for worn or damaged blades. Check to see if a blade is worn out while the others look new. If this is the case 

there could be a blade pitch issue. Replace any worn blades.

Engine Oil Check

1.  To check the engine oil level, place the trowel on secure level ground with the engine stopped.
2.  Remove the filler dipstick from the engine oil filler hole and wipe clean.

Air Filter Check

1.  Check and clean cooling areas, air intake areas and external surfaces of engine (particularly after storage)
2.  Check air cleaning components and all shrouds, equipment covers, and guards are in place and securly fastened. 

Verify Fuel Source

1.  Verify “Fuel Selector Valve” is in the proper position (Horizontal) for the fuel source that is being used. 

Pre-Start Procedures

SECTION 2

OPERATIONS

064634

Page 32

Содержание PRO WALK-BEHIND











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды