allen MSP455 Скачать руководство пользователя страница 25

Страница: 25 / 108

052793 - 03/2013

SECTION 1

SAFETY

Page 1-9

General Safety (cont’d)

●

DO NOT

start the engine near spilled fuel or combustible

uids. Fuel is extremely

ammable and its

vapors can cause an explosion if ignited.

●

ALWAYS

refuel in a well-ventilated area, away from sparks and open

ames.

●

ALWAYS

use extreme caution when working with

ammable liquids.

●

DO NOT

ll the fuel tank while the engine is running or hot.

●

DO NOT

over

ll tank, since spilled fuel could ignite if it comes into contact with hot engine parts or

sparks from the ignition system.

●

Store fuel in appropriate containers, in well-ventilated areas and away from sparks and

ames.

●

NEVER

use fuel as a cleaning agent.

●

DO NOT

smoke around or near the equipment. Fire or explosion

could result from fuel vapors or if fuel is spilled on a hot engine.

●

DO NOT

drop the battery. There is a possibility that the battery will explode.

●

DO NOT

expose the battery to open

ames, sparks, cigarettes, etc. The

battery contains combustible gases and liquids. If these gases and liquids
come into contact with a

ame or spark, an explosion could occur.

●

ALWAYS

wear safety glasses when handling the battery to avoid eye irritation.

The battery contains acids that can cause injury to the eyes and skin.

●

Use well-insulated gloves when picking up the battery.

●

ALWAYS

keep the battery charged. If the battery is not charged, combustible gas will build up.

●

DO NOT

charge battery if frozen. Battery can explode. When frozen, warm the battery to at least 61°F

(16°C).

Содержание MSP455













































































































Результаты поиска

Содержание MSP455

Отзывы:

Бренды по названию

Популярные бренды

allen MSP455, Руководство по эксплуатации и запасным частям

Результаты поиска

Содержание MSP455

Отзывы:

Бренды по названию

Популярные бренды