Instructions for use
Allen® Advance Table User Guide (D-720722 Ver D)
31
Head Plate
26.
Put the head plate in position on the
rail top at a location to support the
patient’s head.
27.
Attach the Velcro® straps to hold the
head plate in position.
28.
Install the foam head block on to the
head plate.
NOTE:
The Allen® Head Plate is designed to work with the Allen® Foam
Head Block only.
Pre-use check
Before each use of the Allen® Advance Table, make sure all necessary
accessories are attached and the Allen® Advance Table is ready for use. If
any of the controls or indicators do not operate correctly, do
not
use the
Allen® Advance Table. Contact Allen Medical or your local distributor.
Condition
Associated Indicator(s)
The Allen® Advance Table power
cord is connected to the Allen®
Advance Table and to an applicable
power outlet.
The
power indicator
is
on
.
The
On/Off
switch is
on
.
The battery charge level indicator is
on
.
The brakes are
locked
.
The
locked
indicator is
green
; the
unlocked
indicator is
off
.
The Allen® Advance Table is in
pendant mode.
The pendant control indicator is
green
; the manual flip indicator is
off
.
The columns are level (at the same
height).
Near the bottom on the outside of
the columns, there are numbers to
help identify the height level.
The support top is horizontal (not
tilted).
The tilt level indicator is
green
; the
tilt indicator is in the center of the
tilt indicator area.
Содержание A-71101-EU
