![Allen Organ Company MDS-8 Скачать руководство пользователя страница 23](http://html1.mh-extra.com/html/allen-organ-company/mds-8/mds-8_manual_2899417023.webp)
MDS-8 Section
VII
19
Do not use wax, sprays or oils on the finish. Satin finished surfaces will take on a semi-
gloss appearance when waxed and will eventually become yellowed. If you need to
“polish” the organ for a special event, use only a very high quality wood furniture polish.
Keys and stops should be cleaned using two clean cloths. Immerse one in clear,
lukewarm water and wring it thoroughly damp dry. Loosen the dirt with this cloth, then
polish with the dry cloth. Do not use soap or detergent on the keys or stops.
To polish the clear music rack, a furniture wax polish can be sprayed on a dry cloth and
rubbed on the front of the music rack. Try to keep the wax off of the wood finishes. This
will keep the music rack most clear.
Your Allen Organ not only faithfully reproduces the organ traditions of the past but also
anticipates the innovations of the future. Should you have questions that are not
addressed in this manual, please do not hesitate to contact your local Allen Organ
representative. Welcome to the family of satisfied Allen Organ owners!
BATTERY BACKUP SYSTEM
The memory for the capture system on your MDS organ is sustained by a Lithium battery.
This allows capture settings and related items to be retained in memory when the organ is
switched off or unplugged. Under normal circumstances, the Lithium battery should last for
several years. A built-in warning system will alert you when the battery becomes weak and
needs to be replaced. The green power ON indicator light will flash for about ten seconds
after the organ is switched on if the battery is in need of replacement.
Should the battery in your MDS organ require replacement, contact your local Allen
authorized service representative.
USA ONLY
CAUTION
Do not plug the instrument into any current source other than 105-128 volts,
50/60 Hertz alternating current (AC). A verified grounded outlet is essential to
proper operation and protection of the instrument. Proper polarity should be
checked with an AC circuit analyzer before connecting the organ.
Do not change the cable plug or remove the ground pin or connect with a two-
pole adapter.
If you are in doubt about your electrical connection, consult your local electrician
or power company.