ProcessLogix R500.1 Server Installation Instructions
9
Publication 1757-IN950A-EN-P - September 2002
Installing the RSLinx Activation File
Your ProcessLogix Server is factory loaded with RSLinx Lite. To activate RSLinx OEM
(necessary for full functionality of ProcessLogix) do the following:
1.
Locate the RSLinx Master Disk and insert it into the floppy drive.
2.
Click
Start
⇒
Run
.
3.
Enter this path or
Browse
to:
>A: (or your floppy drive letter)\EVMOVE.EXE<
4.
Click
OK
to launch the move.
5.
Confirm that the floppy drive letter A:, for example, appears in the From Drive field
and the hard drive letter C:, for example, appears in the To Drive field in the dialog
box.
6.
Click
OK
to initiate the move.
7.
Click
Move
to move the file to the hard drive.
Wait for a dialog box to give a successful move indication, and click
OK
to exit.
8.
Remove the Master Disk from your floppy drive and store it in a safe place.
ATTENTION
!
Before attempting to move the activation file, you MUST exit all
ProcessLogix applications and stop all ProcessLogix services. For
details on this procedure, refer to “Stopping ProcessLogix
Applications and Services” in Chapter 8 of the
ProcessLogix R500.1
Installation and Upgrade Guide.
TIP
If you need to reformat your computer’s hard drive, you must first
move the evrsi.sys file back to this Master Disk using this same general
procedure; otherwise, the file will be corrupted.
Allen-Bradley PLCs