8
ProcessLogix R500.1 Server Installation Instructions
Publication 1757-IN950A-EN-P - September 2002
Setting the Date and Time
To correctly set the date and time:
1.
Click
Start
⇒
Settings
⇒
Control Panel
.
2.
Double-click the Date/Time icon.
3.
In the Date and Time Properties window:
a. If necessary, adjust the Date and Time settings.
b. Set the appropriate Time Zone for your location.
c. Uncheck the Automatically adjust clock for daylight saving changes option.
d. Click
OK
.
Creating an Emergency Repair Disk
1.
Insert a blank diskette into the PC's floppy drive.
2.
Click
Start
⇒
Programs
⇒
Accessories
⇒
System Tools
⇒
Backup
.
3.
Click Emergency Repair Disk.
4.
An Emergency Repair Diskette window will appear.
5.
Check the Also back up the registry to the repair directory checkbox and click
OK
.
6.
When finished, click
OK
.
ATTENTION
!
Failure to uncheck the Automatic adjustment for Daylight Savings
Time will cause Redundant Systems to loose “Sync” when the time
is automatically adjusted. Choosing not to automatically adjust the
time allows you to decide when to make the adjustment (at a time
that is not critical to your process).