ProcessLogix R500.1 Server Installation Instructions
5
Publication 1757-IN950A-EN-P - September 2002
Logging on to Windows 2000
1.
Press <Ctrl> + <Alt> + <Delete> to initiate Windows 2000 logon.
2.
Enter >ps_user< as the User name.
3.
Enter >password< as the default password.
4.
Press <Enter> or click
OK
to complete the logon.
Configuring the 1784-PCIC Card
Refer to “1784-PCIC Driver and Installation” and “1784-PCIC Firmware Installation” in
Chapter 7 of the
ProcessLogix R500.1 Installation and Upgrade Guide
for details.
Changing the PC Name
TIP
You must repeat the above steps every time you reboot the Server.
IMPORTANT
If you purchased a new ProcessLogix R500.1 Server from Rockwell
Automation, the operating system and ProcessLogix software have
already been installed.
Once the ProcessLogix R500.1 software is installed, changing the
computer name requires a full uninstall and reinstall of all the
ProcessLogix R500.1 software. Refer to Changing the Computer
Name on a ProcessLogix Server in Chapter 8 of the
ProcessLogix
R500.1 Installation and Upgrade Guide
.
Allen-Bradley PLCs