Allen-Bradley FLEX Ex 1797-IRT8, Руководство по установке

Страница: 7 / 36

FLEX Ex Thermocouple/RTD Input Module 7
Publication
1797-IN004G-EN-P - August 2017
European Hazardous Location Approval
The following applies to products marked II (1)2 G and
II (1) D
•
Are Equipment Group II, Equipment Category (1) 2, and comply
with the Essential Health and Safety Requirements relating to the
design and construction of such equipment given in Annex II to
Directive 2014/34/EU. See the EC Declaration of Conformity at
http://www.rockwellautomation.com/products/certification
for details.
•
The type of protection is “Ex ib[ia] IIC T4” and “[Ex iaD]” according
to EN 60079-11.
•
Comply to Standards EN 60079-0:2006, EN60079-11:2007,
EN 60079-26:2004, EN 61241-0:2006, and EN 61241-11:2006,
reference certificate number DMT 98 ATEX E 023 X.
•
Are intended for use in areas in which explosive atmospheres caused
by gases, vapors, mists, or air are likely to occur occasionally. Such
locations correspond to Zone 1 or 2 classification according to ATEX
directive 2014/34/EU.
IEC Hazardous Location Approval
The following applies to products with the IECEx certification:
•
Are intended for use in areas in which explosive atmospheres caused
by gases, vapors, mists, or air are likely to occur only infrequently and
for short periods. Such locations correspond to Zone 1 or 2
classification to IEC 60079-0.
•
The type of protection is “[Zone 0] Ex ib[ia] IIC T4” according to
IEC 60079-11 and “[Ex iaD]” according to IEC 60079-11.
•
Comply to Standards IEC 60079-0:2004, IEC 60079-11:2006,
IEC 60079-26:2004, IEC 61241-0:2004, and IEC 61241-11:2005,
reference IECEx certificate number IECEx BVS 09.0029X.