Rockwell Automation Publication 5094-IN010A-EN-P - May 2018
5
FLEX 5000 Terminal Base Assembly Modules
About the Terminal Base Assemblies
The FLEX 5000 terminal base assemblies comprise of a mounting base (MB) and a removable terminal block (RTB) depending on your specific
FLEX 5000 I/O module requirements.
FLEX 5000 Mounting Bases – 5094-MB, 5094-MBXT
FLEX 5000 Removable Terminal Blocks – 5094-RTB3, 5094-RTB3XT, 5094-RTB3S, 5094-RTB3SXT
RTB
MB
FRONT VIEW
Backplane connector
DIN rail mount
System connector
Threaded insert for RTB
captive fastener
DIN rail actuator
RTB locking pegs
FRONT VIEW
Keyswitches – set the position
required for the installed module
I/O edge connector
Input/output terminal strips for connecting inputs/
output wiring, commons, power connections, and
customer power supplies
I/O module guide rail
RTB captive mounting screw
NOTE:
The 5094-STB shield bar accessory is
recommended in order to wire the shields for
all analog input, analog output, and HSC
module terminal base assemblies.
Shield bar
