Allen-Bradley ControlNet Compact GuardLogix 1769, Руководство пользователя, Страница: 64 / 100

Chapter 4 Control I/O
To add distributed I/O to your RSLogix 5000 project, perform this procedure.
1. Add the local and remote ControlNet communication modules.
For more information, refer to
Add and Configure a Local ControlNet
Module on page 30 and Add and Configure a Remote ControlNet
Module on page 33 .
2. In RSLogix 5000 software, right-click your remote ControlNet
communication module and choose New Module.
3.
From the Module Properties dialog box, configure the distributed I/O
module.
IMPORTANT
This procedure shows the Module Properties dialog box for a
1794-IB16XOB16P/A digital combo module. However, various
dialogs appear during configuration depending on the type of
distributed I/O. For help configuring a module, refer to the online
help in RSLogix 5000 software.
To Then
Use the module’s default configuration a. Type the module name, communication
format, and RPI.
b. Click Finish.
Customize the configuration a. Type the module name, communication
format, and RPI.
b. Click Next to proceed through
subsequent screens to configure
additional parameters, such as filter
times and fault actions.
64 Rockwell Automation Publication CNET- UM001E-EN-P - June 2016