14
ControlLogix AC (10-265V) DC (5-150V) Isolated Relay Module
Publication
1756-IN513D-EN-P - November 2003
Remove the Removable Terminal Block from the Module
If you need to remove the module, you must remove the RTB first.
Before removing the module, you must remove the RTB.
Remove the Module
WARNING
When you insert or remove the module while backplane
power is on, an electrical arc can occur. This could cause
an explosion in hazardous location installations. Be sure
that power is removed or the area is nonhazardous
before proceeding.
20855–M
2.
Open the RTB door and pull
the RTB off the module.
1.
Unlock the locking tab at
the top of the module.
42517
1.
Push in top and bottom locking tabs.
2.
Pull module out of the chassis.
20856–M
20857–M
