Allen-Bradley 193-DNENCAT Скачать руководство пользователя страница 78

Страница: 78 / 112

Rockwell Automation Publication 193-UM014C-EN-P - August 2016

Chapter 8

Email/Text

2. Type the Device Identity information into the fields as described below.

3. Click Apply Changes to save the configuration.

Text Notifications

The EtherNet/IP communication auxiliary module can send a text message to

a wireless phone be emailing the wireless phone service provider. The format

for the text message is provided by the service provider and looks similar to the

example formats shown.

Multiple email addresses can be entered into the Email Recipient field,

separating each email address with a semicolon (;). The Email Recipient field is

limited to 255 characters.

Device Name

The name of the EtherNet/IP communication auxiliary module.

Device Description

The description of the EtherNet/IP communication auxiliary module.

Device Location

The location of the EtherNet/IP communication auxiliary module.

Contact Information

The contact information for the EtherNet/IP communication auxiliary module.

Device X Name

The name of the DeviceNet device being scanned.

Device X Description

The description of the DeviceNet device being scanned.

AT&T™

10-digit wireless phone [email protected]

Sprint®

10-digit wireless phone [email protected]

EXAMPLE

An EtherNet/IP communication auxiliary module sending an email and

text message when a Communications Timeout event occurs:

Содержание 193-DNENCAT

















































































































Результаты поиска

Содержание 193-DNENCAT

Отзывы:

Allen-Bradley 193-DNENCAT, Руководство пользователя, Страница: 78 / 112

Результаты поиска

Содержание 193-DNENCAT

Отзывы: