Allen-Bradley 1788-EN2DNR, Руководство пользователя, Страница: 54 / 78

54 Rockwell Automation Publication 1788-UM059B-EN-P - September 2015
Chapter 4 Configure the Linking Device
Studio 5000 Environment These procedures explain how to work with the linking device in the
Studio 5000® environment.
Add the Linking Device to a Studio 5000 Logix Designer Application
1.
In the Studio 5000 Logix Designer
®
application, from the File menu,
choose New to create a new project.
The New Controller dialog box appears.
2.
From the Type pull-down menu, choose the controller type.
3.
From the Revision pull-down menu, choose the controller version.
4.
In the Name box, type a name for the controller project.
5.
Click OK.
A project is created.
Configure the Linking Device
1.
In the left pane, right-click I/O Configuration.
2.
Click New Module.
3.
From the Select Module Type dialog box, select any EtherNet/IP bridge
module (such as the 1756-EN2TR module) and click Create.
The New Module dialog box appears.
4.
In the Slot Number pull-down, choose the slot number in which the device
resides.
5.
Click OK.
6.
In the right pane, right-click the EtherNet/IP module you just added to
your project and choose New Module.