Communication Interface Module
Cat. No. 1784-KT2/C
Installation Data
6
2.
Cycle the power switch. When the following message appears, press
[ENTER]:
Press [ENTER) to continue.
3.
When the main menu appears move the cursor down to the Set
Configuration option and press [ENTER].
MAIN MENU
1.
Learn about the computer
2.
Backup the Reference Diskette
3.
Set configuration
4.
Set features
5.
Copy an option diskette
6.
Move the computer
7.
Test the computer
Use
↑
or
↓
to select. Press Enter.
Escape=Quit F1=Help
4.
When the Set Configuration menu appears move the cursor down to
the Backup Configuration option and press [ENTER].
Set Configuration
1.
View configuration
2.
Change configuration
3.
Backup configuration
4.
Restore configuration
5.
Run automatic configuration
Press a number to select
Esc=Quit F1=Help
This creates a backup of your PS/2 computer’s current configuration.
5.
When the procedure is complete, press [ENTER] to return to the Set
Configuration menu.
6.
Press [ESC] to quit.
7.
Remove the IBM PS/2 Reference diskette from drive A and re-start
the PS/2 computer.