Allen-Bradley 1747-OC Series, Руководство пользователя

Страница: 67 / 126

1747-UM001A-US-P - March 2000
Chapter
6
Installing Software
Before You Begin
This chapter shows you how to:
•
install software
•
install operating systems
Unless otherwise indicated, the procedures in this chapter will work for
both the 1747-OCE and 1747-OCF.
Installing Software onto a
Native IDE Drive How you install software, such as programming tools or applications, onto a
native IDE drive depends on the hardware in your open controller system.
You may find it easiest to boot your open controller from a remote PC
through COM2, making the remote PC appear as a floppy drive on the open
controller, after which you can transfer software to the native IDE drive (see
Page 6-3). Table 6.A lists the various methods you can use to install
software onto the native IDE drive.
Table 6.A
Installing software onto a native IDE drive
To do this: See:
Install from a remote PC through COM2 Page 6-3
DOS documentation
Install from a host computer using DOS
interlnk
on COM1 or COM2 Page 6-5
DOS documentation
The open controller will only have access to
drive A: on the remote PC
Run
hostsvr
on the remote PC
serial link
Run
intersvr
on the remote PC
in
congfig.sys
of the open controller
The
interlnk
device statement must be
serial link
Allen-Bradley HMIs