ALLEN & HEATH XONE:DB2, Руководство пользователя

Страница: 22 / 41

Allen & Heath XONE:DB2 User Guide 22
AP8640_2
ADVANCED SETUP MENU
HP SETUP
This menu enables you to set the sensitivity, audio
source and mode of the headphone cue system
Trim: Adjusts the operating level of the headphone amplifier to match the sensitivity of your
heaphones. The trim ranges from –28 to +12 dB.
Mode: Toggles between Split and Normal . In Split mode a mono sum of the main mix is sent to the
right headphone and the cue signal in the left. Use the CUE/MIX control to pan between the two . The
main meters will display cue level on the left and mix level on the right.
Normal mode will provide a stereo cue or main mix signal to the headphone output, dependant of the
position of the CUE/MIX control. The meters will display a stereo signal level of the main mix, or the
channel pre-fade signal level when a Cue is activated.
Cleanfeed: Selects whether of not the signal from the Microphone input is routed to the headphones
when the CUE/MIX control is set to Mix; for instance, if you don’t want to hear the MC’s microphone
when beat-matching to the main mix set this to On. The options are On/Off.
Auto-mute: If this is set to On, the headphone output will be muted until a channel Cue is activated. If
set to Off, the headphone output will default to the main mix or clean feed when all channels cues are
off.
AutoCue: Selects whether or not the selected cue will auto-cancel any other selected cue. If set to
On, cancellation will occur, if set to Off you will need to manually cancel any other selected cue.
MIX SETUP
Trim: Sets the signal level of the Main Mix outputs.
0.0dB corresponds to a nominal output level of +4dBu
when the main meters read 0VU. This is an ideal level
to feed power amplifiers or interface with pro audio
equipment. If the Mix level is too high, it can be
attenuated by up to 40dB.
Phase: Allows you to reverse the individual left/right signal Phase of the Main Mix outputs.
This control can also be used as a temporary fix for wrongly wired balanced cables or speaker
systems.
Normal means that the mixer is Phase coherent, i.e. the output signal is the same phase as the input.
Pan: Adjusts the left/right balance of the main MIX output to compensate for speaker placement or
source imbalance - this will only affect the XLR outputs, and will not affect the Booth or Headphones.