Allen & Heath
XONE:DB2 User Guide
14
AP8640_2
THE FX SECTION
4
5
FX Operation
Pressing any of the five effects buttons
[
1
]
will select that effect. Each time
an effect button is pressed it will illuminate green. Only one effect per
channel can be selected.
When an effect is selected further parameters can be adjusted using the
global control encoders above the effect type switches; see Page 16 for
details.
Each basic effect type, DLY, VRB, RES, MOD, and DMG has a library of
alternative effects within the same category. These are accessed using the
SELECT button
[
2
].
Press the SELECT button to open up the effect library
list on the display screen. See page 15 for details.
To turn ON the selected effect, press the relevant FX ON switch
[
6
].
This
switch has two modes of operation, latching and momentary. To latch the
switch ON, tap once. To briefly switch ON an effect, press and hold the
button; the effect will turn off on release. This function also works the
other way, so if an effect is ON, pressing and holding the button will turn
the effect off until the button is released.
The effect can also be filtered using the FILTER control
[5]
. Rotating the
filter clockwise will operate a high pass filter, and rotating anticlockwise will
operate a low pass filter. The LED above the control will illuminate green if
it is in its centre position (i.e. filter off) or red if in the high pass or low pass
region, giving a visual indication that the filter is engaged. The effect of the
filter will only be heard if the FX ON switch
[6]
is illuminated.
The filter can be used independently of the effect by setting the wet/dry
control
[4]
to dry (fully anticlockwise).
1
The intuitive layout of the XONE:DB2 FX section enables easy selection of
any one of the five different effect types:
(DLY) DELAY
(VRB) REVERB
(RES) RESONATOR
(MOD) MODULATOR
(DMG) DAMAGE
The WET/DRY control
[
4
]
sets the level from no effect (DRY) when fully
anticlockwise to maximum effect (WET) when fully clockwise.
The EXPRESSION
[
3
]
controls a further parameter; for instance,
regeneration when DELAY is selected.
All time related effects are automatically synchronised to the music by the
BPM detection system.
DLY
VRB
RES
MOD
DMG
3
6
2
Содержание XONE:DB2
