16
ML4000
User Guide
Rear Panel Connections
IN.
XLR input for mic or line level signals. Pin 2
hot. Phantom power is fed to pins 2 and 3 through
6k8 series resistors when the front panel +48V
switch is pressed.
WARNING
: Do not connect
unbalanced sources or cables to the XLR inputs
when phantom power is selected. To avoid loud
clicks always turn the channel off by pressing
the MUTE switch when swi48V on or off
and when plugging or unplugging microphones.
INSERT.
Separate TRS jack sockets for send and
return. The insert is post-HPF and pre-EQ. It can
operate with both balanced or unbalanced line level
equipment. The channel signal path is interrupted
when you plug into the RETURN socket. You can
tap off the pre-EQ signal without interrupting the
signal path by plugging into the SEND socket.
DIRECT OUT.
TRS jack providing the post-fade
channel signal as standard. You can reconfigure
the output as pre-fader or as post-fader with the
AUX 1 send control as a level trim by repositioning
internal jumper links. The output is ground
compensated.
EXPANDER AUDIO.
Two 37-pin D-connectors to
connect the outputs of the expander sidecar into the
main console. These provide inputs to all the mix
busses and P/AFL system. They are balanced and
operate at –2dBu. Up to two sidecars may be
connected.
Note that the audio outputs of the first sidecar plugs
into the second. The output of the second presents
the combined mix to the main console.
The expander inputs conform to the Allen & Heath
SYS-LINK II standard. You can connect to a
console fitted with SYS-LINK I using special adapter
cables. Contact Allen & Heath for details.
EXPANDER LOGIC.
9-pin D-connectors to link
the expander sidecar and main console logic
system. Up to two sidecars may be connected.
MIDI.
Three standard opto-isolated 5-pin sockets
for MIDI IN, OUT and THRU. The small slide switch
selects either the MIDI or RS232 connection. For
normal console operation it is recommended that
the switch is set to MIDI. The power up boot routine
is quicker in this position than RS232.
RS232.
9-pin D-connector to connect to the serial
port of a PC for loading new console operating
software or archiving the settings. To enable
RS232 set the slide switch to the RS232 position.
Set it back to the MIDI position when finished.
DC POWER IN.
A heavy duty 7-pin connector with
locking ring for connecting to the console power
supply unit. A chassis ground terminal post is
provided for situations that require earth strapping
between equipment.
WARNING
: Use only the DC power
cable provided with the console.
INPUT
DIRECT
INSERT
INPUT
EXPANDER AUDIO
A
IN
RET
SEND
INSERT
OUT
DIRECT
INSERT
IN
RET
SEND
INSERT
IN
RET
IN
RET
SEND
SEND
DIRECT
DIRECT
OUT
OUT
OUT
B
IN
RET
INSERT
SEND
IN
RET
SEND
INSERT
DIRECT
OUT
DIRECT
OUT
SEND
INSERT
IN
IN
RET
RET
SEND
INSERT
DIRECT
DIRECT
OUT
OUT
IN
IN
IN
IN
IN
IN
IN
IN
Select MIDI for normal operation !
SIDECAR
EXPANDER LOGIC
2
SIDECAR
1
OUT
THRU
IN
Serial No.
DC POWER IN
CHASSIS
GROUND
SELECT
MIDI
RS232
SEND
SEND
SEND
SEND
RET
RET
RET
RET
INSERT
INSERT
DIRECT
OUT
DIRECT
OUT
INSERT
INSERT
DIRECT
OUT
DIRECT
OUT
SEND
SEND
SEND
SEND
RET
RET
RET
RET
INSERT
INSERT
DIRECT
OUT
DIRECT
OUT
INSERT
INSERT
DIRECT
OUT
DIRECT
OUT
Содержание ML4000
Страница 1: ...USER GUIDE Publication AP4314 Dual Function Live Sound Console ...
Страница 18: ...18 ML4000 User Guide Audio Connector Types and Wiring ...
Страница 54: ...54 ML4000 User Guide USER NOTES ...
Страница 56: ...56 ML4000 User Guide Visit Allen Heath http www allen heath com http www mlseries com ML4000 User Guide ...