DX164-W User Guide
AP11446 Issue 2
Top panel and power options
DX A
EtherCon port for connection to the mixing system. The cable
carries the audio signals as well as preamp control and system status data.
DX B
EtherCon port for daisy chaining of a second unit or cable
redundancy.
DX B mode switch
Switch to
Redundant
for 2 cable connection to
compatible hardware e.g. dLive S Class or DX Link card. Switch to
Cascade
for
connection to a second DX164-W or DX168 unit.
DC 12V Input
Can be used instead of AC mains to power the unit
where adequate DC distribution is provided in a building. Can also be used as
a backup power supply in case of mains failure.
Mains power input
The built-in universal PSU accepts voltages from
100 to 240V AC 50/60Hz. A module with IEC inlet is fitted by default. An
optional module is provided for permanent installation, with knockout holes to
accept a cable gland.
⚠
Replacement of the IEC module and mains wiring for
permanent installation must be performed by a qualified
electrician. See instructions later in this guide.
