- 33 -
CISA MYEVO RFID READER
OPENING THE DOOR
1. Hold the card or the mini card up to the RFID reader
2. The deadbolts and latchbolt will retract and the door can be opened
If the door is not opened in 10 seconds, it will lock again. It is not possible to deactivate or
modify this action.
If the yellow and green LEDs flash twice before the door is opened,
it means A NEW MASTER CODE MUST BE CREATED (PAGE 25)
CARDS OR MINI CARDS NOT ENABLED
If the card or mini card is not enabled, the RFID reader emits an error signal
DISABLING A USER CARD OR MINI USER CARD
This must be done with the DOOR OPEN.
1. Hold the
Master Card
up to the RFID reader
2. Hold the
Master Card
up to the RFID reader a second time
flashing
3. Hold the card or the mini card to disable up to the RFID reader
Everytimeacardoraminicardisheldup,thegreenLEDwillflashtoconfirmithasbeen
disabled. Several cards or mini cards can be disabled at a time. After 10 seconds of inactivity,
the yellow LED goes off and programming mode is exited.
ENABLING A CHANGE OR SAFE CARD
This must be done with the DOOR OPEN.
1. Hold the
Master Card
up to the RFID reader
2. Hold the
Change Card
or the
Safe Card
to be enabled up to the RFID reader
Everytimeacardisheldup,thegreenLEDwillflashtoconfirmithasbeenenabled.After10
seconds of inactivity, the yellow LED goes off and programming mode is exited.
USING THE CHANGE CARD
The
Change Card
changes the lock’s operating mode. With the
Change Card
it is possible
to go from automatic to semi-automatic mode, from semi-automatic to hold open mode or from
hold open to automatic mode.
