Page 6 of 12
75.5933.04 ALLEGION HMSS 20190723
3
POWER-UP
With the door in the closed position,
apply 12 – 24 VAC / VDC ±10% to the
sensor. LED will flash green until set-up
is successful in "door closed" position.
1
Activate the door to the "fully open"
position. LED will flash green again and the
sensor will execute a "door open" set-up.
1
2
NOTES:
1. If the door control requires a Learn cycle upon powering, it is recommended to allow the doors to complete a Learn cycle
before applying power to the sensor.
