ALLDSP SMA-6P2408
Introduction
Congratulations on the purchase of your SMA-6P2408. ALLDSP strives to be the best in high end digital
audio processing. After you have become familiar with your System Amplifier, we encourage you to
experiment and find the most effective and efficient way to run your system by utilizing the powerful
processing of the SMA-6P2408.
The SMA-6P2408 is a powerful System Amplifier with four analog inputs, two AES3 inputs, two Dante inputs,
six outputs (2 4x800W @ 4 Ohms), 10 PEQ bands per input and output and a frequency range up
to 40kHz. The rugged analog input stage accepts input voltages of up to +23dBu thus matching any source
on the market today, with an excellent dynamic range of 118dB. Using a switch-mode power supply for clean
power supply rails and superior ruggedness, 64-bit digital processing and some of the best converters
available on the market today, the SMA-6P2408 offers sound quality that sets standards in professional as
well as high-end home audio.
This User Manual describes how to operate the SMA-6P2408's settings via the front panel controls.
Alternatively, the SMA-6P2408 can be configured completely via a remote connection to a PC, MAC, iPad or
iPhone. Please refer to the Software User Manual for details on the remote control application.
Controlled via the front panel or via the remote control application, the DSP settings and coefficients are
calculated on-the-fly at the moment of changing the parameters. Frequencies can be set with 1Hz accuracy,
delays with 10 microseconds accuracy, and gains with 0.01dB accuracy. When editing values via the front
panel, some values are limited in granularity; e.g. gain is set via 0.25dB steps in this case.
Features:
- 2x2400W plus 4x800W output power @ 4 ohms, 2x1500W plus 4x500W output power @ 8 ohms
- 2 DANTE inputs
- 118dB dynamic range (inputs) / 114dB dynamic range (outputs)
- Electronically balanced inputs
- Matched-impedance outputs
- Frequency range 20Hz....40kHz
- 10 parametric filters per input and output
- EQs can be set as Bell, High Shelf, Low Shelf, Notch, Allpass, Band Pass, High Pass, Low Pass
- 2000ms delay per input, 2000ms delay per output
- Butterworth, Bessel, Linkwitz-Riley filters up to 24dB / oct.
- True RMS Compressor
- Zero Attack Peak Limiter
- Latency 660 microseconds
- Full configuration and real-time monitoring via PC, MAC, iPad or iPhone
- 100 Presets
- 64 bits multi-mode digital processing
- Loudspeaker Library support
Page 2/11
