ALL-TEST
PRO
®
31 User Manual
©2011, ALL-TEST
Pro,
LLC
www.alltestpro.com
rev 2011-11F
16
2.
Read the Impedance (Z) and Phase Angle (ψ) values from display screen 1 for winding.
Do
not fill in the phase balance until all three phases have been measured.
3.
Press the TEST key to display the Current Frequency Response (I/F).
4.
Record these test results on the Motor Test Form.
ALL-TEST Pro 31 Motor Test Form
Motor ID: Test Motor
Location: Warehouse
Test Date: 8/8/06
Test Frequency 200 Hz
Phase
1-2
Phase
1-3
Phase
2-3
Impedance (Z)
107
107
109
Phase Angle (°)
66
66
66
Z-Test or I/F
-45
-45
-45
Phase balance (opt)
Ins Resistance
Test
Voltage
Was rotor set to lowest value during phase balance test? Y__ N__
Rotor test performed? Y___ N___
Comments:
© ALL-TEST PRO
Winding 3 Current Frequency
