All Security Equipment ASE-KP1000EGRESS, Руководство по программированию и установке, Страница: 9 / 19

8
LOCATION 1
#
OPTION
LOCATION n
#
OPTION n
* e) Exit programming mode with the key after all your required options are programmed.
The new information that you have programmed will be saved.
B) Single User Mode Operat ion – Operation Example
1) Requirement
a) Single User Mode Operation
b) Change factory set Master Code 0000 to a Personal Master Code 3289
c) Set User Code 1 to 8321
d) Set User Code 2 to 6854
e) Set Output 1 to Momentary Mode. 1 second
f) Set Output 2 to Start / Stop (toggle) Mode
g) Set Keypad to lock itself for 15 minutes after 10 successive false codes
0 0 0 0
*
8 9 0 0
1 0 3 2 8 9
1 8 3 2 1 1 0 2 0 0
2 6 8 5 4
5 1 1
0 5 2
6 0 1 0
* *
#
#
#
#
#
#
#
-------
-----------
---
---
---
-------------
------------
---------
-----------------------
System has been placed in program mode with factory set Master Code
System has been set for Single User Mode ** (see note (a) below)
3289
has been stored as the new Personal Master Code & Super User Code
8321
has been stored as User Code 1, with Duress Code function
on Output 1
6854
has been stored as User Code 2, for output 2
Output 1 has been set to momentary mode with 1 second duration
Output 2 has been set to Start / Stop (toggle) mode
The keypad has been set to lock for 15 minutes after 10 successive false
codes
Keypad exits programming mode. All changes are stored, system is
ready to use
*
2) Programming – Set the above requirements into the keypad:
*
1 0 2 0 0
a) In case of wrong entry during programming, cancel with key, or, wait 10 seconds, then
re-try.