All Security Equipment ASE-KP1000EGRESS, Руководство по программированию и установке, Страница: 6 / 19

5
0 0 0 0
*
Set system into programming mode with factory set master code.
0
2
#
#
#
4 digits, fixed
4 digits, fixed
4 digits, fixed
Personal Master Code & Super User Code
User Code 1 for output 1 with Duress Code function
User code 2 for output 2
1
1
0
0 # 4 digits, fixed Super Code
# 1 Super User
For output 1
# 2 Super User
For output 2
Using Super Code:
2
0
2
2
PROGRAMMING OPTIONS – SUMMARY CHART
A) Use t he Fact ory set Mast er Code t o ent er int o programming mode – on first use
Enter code Validation Comments
*
B) Recording of Personal Mast er Codes & User Codes – User Programming
i) Recording of t he mast er code and user codes for single user (
digits may be repeated
)
Locations Entry of Codes Validation Comments
5 1
5 1 0
5 2
1 to 999 #
#
#
From 1 to 999 seconds (default is 5 seconds)
Output 1 in Start / Stop Mode (toggle)
Output 1 in Start / Stop Mode (toggle) with
accelerated code
5 2
5 2 0
1 to 999 #
#
Output 2 in momentary mode from 1 to 999 seconds
(default is 5 seconds)
Output 2 in Start / Stop Mode (toggle)
6 0
6 0
1
2
6 0
6 0
5 to 10
00
#
#
#
#
After 10 successive false codes, keypad will lock
After 10 successive false codes, the Duress output
switches to ground.
for 60 seconds.
Selectable from 5 to 10 successive false codes, the
keypad locks for 15 minutes. The keypad can be
reset to release lock with the Master Code at any
time during the locking period.
Removal of all above security settings
C) Configurat ion of Out put Modes – Installer Programming
Locations Code of Duration Validation Comments
D) Personal Safet y – Installer Programming
Locations No. of False Entry Validation Comments
(system default)