All Security Equipment ASE-KP1000EGRESS, Руководство по программированию и установке, Страница: 8 / 19

7
* * Keypad exits programming mode and returns to normal operation
K) Exit Programming Mode
Validation Comments
Default Values
Default Values Comments
511 output 1 in 1 second Momentary Mode
521 output 2 in 1 second Momentary Mode
601 After 10 successive false code the keypad lock for 30 seconds
800 Door forced open alarm is disabled
702 User Code Manual Entry Mode ** (for multi-user mode)
701 User code Auto Entry mode ** (for single user mode)
810 No propped Open alarm
# 4 1
01-50 1)
J)
Duress Code
– Installer Programming
Output Duress Code ID
4 digit code
# 4 2
01-10 2) 4 digit code
# 4 3
01-10 3) 4 digit code
Duress Codes Validation
#
Comments
4 0 01-50 00 = One use
01-99 hours
J)
Visitor Codes
– Installer Programming
Location Visitor ID Valid Period
4 digit code
Visitor Code
Codes not valid after
one use or time expires
Validation
*
MASTER CODE
* *
Programming and use of t he keypad – Operation Examples
A) Programming Procedures
a) All programming is accomplished through the keypad. The keypad may be programmed in
your shop or at the installation site. Programmed information is stored in non-volatile
memory and will not be lost if the power is removed.
b) When programming is required, it is necessary to set the keypad into programming mode
using the master code and validating with the key twice.
c) After the keypad is in programming mode, y ou may go to any location for programming
options one by one. (Please see programming options summary chart for details)
d) You may make continuous programming until all desired options are programmed.
Repeated programming at the same locat ion is allowed if the previous entry was
mistaken.