5. STARTING THE ENGINE
Before starting the engine, disconnect any load from the AC receptacle.
1.Turn the fuel cap lever fully clockwise to the ON position.
NOTE: Turn the fuel cap vent lever to the OFF position when transporting the generator.
FUEL CAP VENT LEVER
ENGINE SWITCH
2.Turn the engine switch to the ON position.
ON
ON
OFF
ON
4. Pull the starter grip until resistance is felt, the pull the starter grip briskly toward the
arrow as shown below.
3. Move the choke lever to the START position.
NOTE:
Do not use the choke when the engine is warm or the air temperature is high.
CAUTION
Do not allow the starter grip to snap back, Return it slowly by hand.
STARTER GRIP
CHOKE LEVER
START
START
