ALL-O-MATIC SL-175DC, Руководство пользователя

Страница: 13 / 33

10
ELECTRICAL CONNECTION
Ÿ
All gate operators MUST be properly grounded. This minimizes or prevents damage due to electrical charge,
such as a near lightening strike or an electrical static discharge.
Ÿ
Use a single wire for the ground. DO NOT splice two wires for the ground. If the wire breaks or is cut, replace it
with a single length wire. NEVER use two wires for the ground.
Ÿ
Check the local city code for proper earth ground rod type and grounding procedures.
OPERATORS MUST BE PROPERLY GROUNDED!
230V
1
15V
GRD LINE 1 LINE 2
Ÿ
Use a minimum of a 20-amp , dedicated circuit for power.
Power Connection 115 VAC 220 VAC Single Phase
LINE 1 115V HOT 220V LINE 1
LINE 2 115V NEUTRAL 220V LINE 2
GND GROUND GROUND
POWER AND BATTERY
SWITCHES
NOTE: WHEN APPLYING
230V TO THE OPERATOR,
MAKE SURE VOLTAGE
SWITCH IS FLIPPED TO 230V
POWER BOARD