SAFETY INSTRUCTIONS
O I G ITA L WATE R IO N IZE R
^
If the unit is immersed in water, immediately pull out the power
MIEII
plug and then take the unit out of the water.
^
^
^
Try to avoid an electric circuit overload of an outlet or electric
wiring. Connect the unit power plug to an AC power outlet.
> Ensuring that the unit is connected directly to a power supply outlet
will avoid a circuit overload and reduce risk factor.
Do not touch the plug with wet hands when you insert or remove it
from a power outlet.
For a stable fit, plug in the power cord completely.
>
If the plug fitting is not stable, it may emit electric shocks or cause a
fire due to overheating.
>
Do not use a damaged plug or an unstable power outlet.
If
the
supplied
cord
is
damaged,
it
must
be
replaced
by
the
X?Il
manufacturer or a service agent. Please contact the business who
MBfiI
sold you the product and refer to the manufacturer's warranty.
Do not install the unit in below-freezing
fire hazards.
>
Correct room temperature range: 10 ~ 35oC
Correct inflow water temperature: 5
~
30oC
AK
temperature or near any
;'
-
@
"O
'
Do not install the unit in direct sunlight.
>
Extreme environment exposure may cause the body of the exterior
unit to discolor and may cause the casing of the entire unit to
warp/twist. This may result in mechanical failure.
Always install the unit on a horizontally flat and sturdy surface.
\ a
~j/
Do not place heavy items on the top of the unit.
/
