INSTALLATION
',', '
DIGITAL
WATER
IONIZER
1. Select a sturdy flat surface with proximity to a power outlet.
2.
Firmly connect the provided 1/4" hose to
Water Inlet Port.
1)
In the case of one-touch fitting apparatus, insert the Water Inlet Pork nozzle into the hose and fasten the safety
key after the connection,
2)
In the case of two-touch fitting apparatus, make sure the nut is tightly screwed to ensure a tight fit.
Hose
Check Valve
(Caution:Flow Direction)
3. Connect the hose to Acidic Water Outlet Port and cut the other end of
the hose so that you have enough length to reach the sink. This
allows you to drain the acidic water or to connect to an acidic water
bucket. (You may use a hose holder.)
> If Acid Water Outlet Hose is steeped in a water receptacle or the hose is unnecessarily long, the
drainage of ionized water might be suspended. To avoid this, please have a shorter hose length to allow
natural drainage.
> Do not life the acidic water outlet hose up. Otherwise, this will hinder natural drainage and may cause
internal damage or performance degradation.
