AliveCor, Inc. For support, please email [email protected] or visit
6
ECG reports viewed or printed at any magnification other than 100% may appear
distorted and could lead to misdiagnosis.
The heart rate is based on the heart rhythm; therefore the rate is only valid if there
is a valid rhythm (QRS complex visible).
The Interference Detector may incorrectly identify ventricular flutter, ventricular
bigeminy and ventricular trigeminy as unreadable. If you have been diagnosed with
one or more of these arrhythmias, we recommend turning off the Interference
Detector in your Settings.
AliveCor cannot guarantee that you are not experiencing an arrhythmia or other
health condition when labeling an ECG as normal. You should notify your doctor of a
possible change in your health.
5.
SET UP THE MOBILE ECG AND TAKE THE FIRST ECG RECORDING
5.1.
Decide which smartphone or tablet to use
Your Mobile ECG is compatible with all of the smartphones and tablets listed on
AliveCor s website:
http://www.alivecor.com/compatibility
, including:
Samsung Note 3
Galaxy S3, S4 and S5
HTC One
Jitterbug Touch 2 and Touch 3
The AliveECG App is compatible with the Android Operating System versions 4.0 -
4.4.
You can use the Mobile ECG with Universal Attachment Plate on all compatible
smartphones or tablets as listed on the Compatibility Chart.
The Mobile ECG for Samsung Galaxy S5 can also be used on all compatible
smartphones or tablets by removing the oval-shaped Mobile ECG from its case:
1.
If the Mobile ECG is currently attached to a Samsung Galaxy S5, remove the
Mobile ECG (and case) from the phone.
2.
Face the electrodes of the Mobile ECG away from you.
3.
Gently push the left side of the Mobile ECG toward you while at the same
time gently pulling the left edge of the case away from the Mobile ECG itself.
4.
The Mobile ECG should then pop out of its case.
5.2.
Unpack the AliveCor Mobile ECG
Remove the Mobile ECG from the box.
The Mobile ECG with Universal Attachment Plate can be attached to the
smartphone or tablet directly or to the case of your choosing (the surface should
be smooth and flat).
o
AC-001 - AC-007: With the AliveCor logo right side up, the top of the
smartphone or tablet should be on the right.