Alisun DESIRE K, Сборка и сервисное обслуживание

Страница: 11 / 22

's4' or 'face' version) then these lamps can
be switched on and off using switch (A).
The PLL lamps and hard face-tanner can
only be switched on if the body lamps are
also lit.
ACRYLIC SHEET
The acrylic sheets should only be removed
when the equipment is at room
temperature.
When you wish to remove the acrylic
sheet, please do the following:
Unscrew the 2 screws (B) and remove
the locking plate (A).
Canopy front and bench rear:
Take a flat-bladed screwdriver, with a
blade at least 6 mm in width, and insert
it between the aluminium profile and the
plastic profile. Next turn the screwdriver
slightly in the direction indicated by the
arrow. This will free the plastic profile
from the aluminium profile.
Now pull the whole profile loose.
Repeat this procedure with the other
profile.
Canopy rear and bench front:
Take a little flat-bladed screwdriver and
insert it between the white plastic profile
(A) and the pink plastic profile (B).
Lift the pink profile carefully with the
screwdriver. This will free the plastic
profile from the aluminium profile.
Now pull the whole profile loose.
Removing acrylic sheet canopy:
Lift the front side of the acrylic sheet to
free it from the aluminium profile, the
acrylic sheet can now be slid out of the
appliance.
The cover strip can be pushed out of
the end piece, both at the head end and
the foot end of the appliance.
Replacing acrylic sheet canopy:
Slide the cover strips at each end into
the end pieces.
Slide the acrylic sheet into the
appliance.
Removing acrylic sheet bench:
Slide the acrylic sheet with the flat of
the hand as far as possible to one side,
the acrylic sheet will now get free from
the endpiece at the other side.
Possibly you need to lift the acrylic
sheet carefully with a screwdriver to
free it from the aluminium profile.
The acrylic sheet can now be removed
from the bench.
The cover strip can be pushed out of
the end piece, both at the head end and
the foot end of the appliance.
Replacing acrylic sheet bench:
Slide the cover strips at each end into
the end pieces.
Slide the acrylic sheet at one side into
the end piece.
Slide the acrylic sheet with the flat of
the hand also into the other end piece