30
Pressing the
FUNC
and
TS/DCS
keys simultaneously also
displays the menu.
Default display is 0 on the right end of the display. Memory channel
icon displays which of the ten autodial memories (0~9) is in use.
Last selected memory channel is transmitted.
2.
Use [UP]/[DOWN] keys to select the
desired autodial memory channel from
0 to 9.
3.
Rotate the dial to select the first digit, then press dial to enter. The
Cursor moves toward right. Repeat sequence to complete.
4.
Use [-] for pause. The display scrolls when the 7th digit is entered.
The numbers 0 to 9, A to D, pause, * and # can be stored up to a
total of 17 digits. Also the numerical keys on the microphone is
usable to set characters.
5.
To check the entered digits, press
FUNC
then rotate the dial while icon is on.
Use
SQL
key to correct previous,
CALL
to delete all characters.
6.
Press
V/M
key to set and return to the menu mode.
DTMF TX SPEED
Set the tone output speed when outputting DTMF using the automatic
dialer.
1.
Rotate the dial or press the [UP]/[DOWN] keys on the microphone
to display the menu number "21".
The current setting will appear on the
display.
The default setting is "50" (50ms).
7
PARAMETER SETTING MODE
2.
Press dial to display SET, then rotate dial or press the [UP]/[DOWN]
keys on the microphone to change the setting.
The options are as follows.
▼
50 (50ms), 100 (100ms), 200 (200ms)
3.
Press the dial.
The unit will go back to menu mode.
DTMF PAUSE TIME
Set the pause time when outputting DTMF using the automatic dialer.
1.
Rotate the dial or press the [UP]/[DOWN] keys on the microphone
to display the menu number "22".
The current setting will appear on the
display.
The default setting is "500" (500ms).
2.
Press dial to display SET, then rotate dial or press the [UP]/[DOWN]
keys on the microphone to change the setting.
The options are as follows.
▼
100 (100ms) to 2000 (2000ms) (20 steps in 100ms increments)
3.
Press the dial.
The unit will go back to menu mode.
