Alinco DJ-195 Скачать руководство пользователя страница 26

Страница: 26 / 34

S-meter (1) Adjustment

1. In the adjustment mode, select channel 7 by rotating the main tuning dial.

The S-meter will show a single circle ( )

2. Enter “0”dBu(EMF) with the transceiver tester (SSG).

3. Press the F key. The transceiver beeps indicating the new setting has been

stored successfully.

S-meter (FULL)

1. In the adjustment mode, select channel 8 by rotating the main tuning dial.

The S-meter will show all six circles (

)

2. Enter “+20”dBu (EMF) with the transceiver tester (SSG).

3. Press the

key. The transceiver beeps indicating the new setting has

been stored successfully.

Deviation

1. In the adjustment mode, select channel 9 by rotating the main tuning dial.

2. Input a 50mVrms, 1KMz signal with your transceiver tester through the

external microphone jack.

3. With the tester, put the transceiver in the transmission mode.

4. Rotate the VR1 on the printed-curcuit board of the transceiver until the de-

viation is set to 4.5KHz.

DTMF (1) Test

This function is only for checking the DTMF code, not adjusting it.

1. In the adjustment mode, select channel 10 by rotating the main tuning dial.

2. Press the

key. DTMF code “1” is automatically sent and you will

hear the monitoring tone from the speaker.

3. Check the deviation with the transceiver tester.

DTMF (D) Test

1. In the adjustment mode, select channel 11 by rotating the main tuning dial.

2. Press the

key. DTMF code “D” is automatically sent and you will

hear the monitoring tone from the speaker.

3. Check the deviation with the transceiver tester.

Tone 67Hz Test

This function is only for checking the tone encoder, not adjusting it.

1. In the adjustment mode, select channel 12 by rotating the main tuning dial.

2. Press the

key. A 67Hz tone is automatically sent.

3. Check the deviation with the transceiver tester.

Tone 88.5Hz Test

1. In the adjustment mode, select channel 13 by rotating the main tuning dial.

2. Press the

key. An 88.5Hz tone is automatically sent.

3. Check the deviation with the transceiver tester.

Содержание DJ-195



































Результаты поиска

Содержание DJ-195

Отзывы:

Похожие инструкции для DJ-195

Бренды по названию

Популярные бренды

Alinco DJ-195, Руководство по обслуживанию

Результаты поиска

Содержание DJ-195

Отзывы:

Похожие инструкции для DJ-195

Бренды по названию

Популярные бренды