50 | Operating the monitor
NVIDIA ULMB NVIDIA ULMB
(Ultra Low Motion Blur) helps have
less of a motion blur effect while you are watching fast-
moving images. When the graphics card supports G-
SYNC, make sure that the Enable G-SYNC function is
not selected in the NVIDIA Control Panel.
NOTE:
This function is available when the refresh rate is
144 Hz or 240 Hz with DP connection. Ensure that the
DP cable is directly connected to the monitor DP port.
This function is not available when connecting DP
through a dongle/hub.
NOTE:
When
G-SYNC
is enabled in the NVIDIA
Control Panel, the message of G-SYNC Mode is
displayed. If your system doesn’t support G-SYNC,
then the message of Normal Mode is displayed.
NVIDIA ULMB
Pulse Width
Allows you to adjust the panel's backlight a bit, so as to
reduce motion blur. Use the joystick to adjust the level
from 10 to 100. Smaller values decrease motion blur
and brightness.
Audio
Volume
Allows you to set the volume level of headphone
output.
Use the joystick to adjust the volume level from 0 to
100.
Reset Audio
Resets all settings under the
Audio
menu to the factory
defaults.
