Alienware Area-51m 766, Руководство пользователя

Страница: 68 / 101

■
chapter 4 upgrading your computer
4-8
8. Install the new DIMM module into the memory socket.
The DIMM will only fit in one orientation. Insert the DIMM at an
angle of approximately 30 degrees into the empty memory
socket. Then press it firmly so that the contact edge is driven
into the receiving socket.
Notch
9. Pivot the DIMM until the latches on both sides of the
socket snap into place.
Note:
Notice the notch on the DIMM. The notches should fit nicely with the
socket.
10. Replace DIMM Metal Cover and 3 Screw A’s. Put the
keyboard back to its position. Make sure the upper edge of the
keyboard now resides under the spring-loaded latches.
Congratulations! You have just completed the memory upgrade.
When you boot up the computer, you should expect to see an
increase in DRAM capacity.
Note:
Your computer has been tested with a wide range of DIMM on the
market. However, not all memory modules are compatible. Check with your
system vendor for a list of compatible DIMM for your computer.