■
chapter 4 upgrading your computer
4-4
6.
Locate and remove 4 Screw C’s from the HDD module.
Remove the metal case.
Screw C x2
Screw C x2
Metal Cover
7.
Re-attach the metal cover to the new hard drive and
tighten 4 Screw C’s. Note the green PC board of the hard disk
drive is facing against the metal case.
8.
Re-attach the HDD Cable Connector to the HDD module.
9.
Re-attach and tighten 4 Screw B’s. (If the HDD assembly
is not fully inserted into the bay, the screw and its hole will not
line up.)
10.
Replace the System Device Cover and 2 Screw A’s.
Congratulations! You have now completed the hard drive
upgrade. When you boot up the PC, you may need to create a
primary HDD partition and reformat the new drive and re-install
O/S, drivers, and all the necessary applications.
Содержание Area-51m 766
Страница 1: ...i 1...
Страница 13: ...chapter 1 getting to know the basics 1 4 System At A Glance Front View...
Страница 89: ...appendix A product specification A 1 A P P E N D I X A PRODUCT SPECIFICATION...
Страница 95: ...appendix B agency regulatory notices B 1 A P P E N D I X B AGENCY REGULATORY NOTICES...
