background image

BIOS Utilities

The Setup Program 5 - 5

5

Setup Screens

The following pages contain additional advice on 

portions

 of the 

Setup

.

Along the top of the screen is a menu bar with five (

5

) menu headings. When

you select a heading, a new screen appears. Scroll through the features listed
on each screen to make changes to 

Setup

.

Instructions on how to navigate each screen are in the box along the bottom of
the screen. If these tools are confusing, press 

F1

 to call up a 

General Help

screen, then use the arrow keys to scroll up or down the page.

The 

Item Specific Help

 on the right side of each screen explains the highlight-

ed item and has useful messages about its options.

If you see an arrow   next to an item, press 

Enter

 to go to a sub-menu on that

subject. The sub-menu screen that appears has a similar layout, but the 

Enter

key may execute a command.

Setup Menus

The 

Setup

 menus

shown in this section
are for 

reference

 only.

Your computer’s men-
us will indicate the con-
figuration appropriate
for your model and op-
tions.

Содержание Area-51 m7700























































































































































































Отзывы: