17.
Gently slide out the antenna cables through the slot on the computer base.
18.
Move the display to a perpendicular position to the computer base, and then lift the display assembly off the computer.
Replacing the Display Assembly
1.
Follow the instructions in
Before You Begin
.
2.
Place the display assembly in position and replace the two screws, on the display hinges, that secure the display assembly to the computer base.
3.
Route the display cable and LED-logo board cable through the routing guides on the palm-rest assembly.
4.
Connect the display cable, video-card connector cable, and LED-logo board cable to the respective connectors on the system board.
5.
Slide the Mini-Card antenna cables through the slot on the computer base.
6.
Close the display and turn the computer over.
7.
Route the Mini-Card antenna cables through the routing guides on the computer base.
8.
Connect the Mini-Card antenna cables to the Mini-Card (see
Replacing the Mini-Card
).
9.
Turn the computer over.
10.
Replace the macro keyboard (see
Replacing the Macro Keyboard
).
11.
Replace the keyboard (see
Replacing the Keyboard
).
12.
Replace the center control cover (see
Replacing the Center Control Cover
).
13.
Replace the base cover (see
Replacing the Base Cover
).
14.
Replace the battery pack (see
Replacing the Battery Pack
).
Back to Contents Page
1
display assembly
2
screws (2)
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Содержание Alienware M18x
Страница 9: ...Back to Contents Page...
Страница 29: ...Back to Contents Page...
