ALIEN HERO INSTRUCTION MANUAL
94
Last Revised 16/10/2013
8.2 Setting up Alarms
Purpose:
Set up handling method for an external sensor alarm.
Steps:
Enter Alarm Settings of System Configuration and select an alarm input.
Menu> Setup> Alarm
Select
Alarm Input
tab to enter Alarm Input Settings interface.
Figure 8.2a Alarm Status Interface of System Configuration
Set up the handling method of the selected alarm input.
Check the
Setting
checkbox and click
Handling
button to set up its alarm response
actions.
Figure 8.2b Alarm Input Setup Interface
Select Trigger Channel tab and select one or more channels which will start to
record/capture or become full-screen monitoring when an external alarm is input.
Select
Arming Schedule
tab to set the channel’s arming schedule.
Choose one day of a week and up to eight time periods can be set within each day.
Note:
Time periods must be consecutive and must not overlap.
Select
Handling
tab to set up alarm response actions of the alarm input (please refer
to
Chapter 8.6
).
Repeat the above steps to set up arming schedule for other days of the week. You can
also use
Copy
button to copy an arming schedule to other days.
Содержание ALIEN654
Страница 20: ...ALIEN HERO INSTRUCTION MANUAL 20 Last Revised 16 10 2013 1 5 6 Pending new model ...
Страница 102: ...ALIEN HERO INSTRUCTION MANUAL 102 Last Revised 16 10 2013 Figure 8 7a Clear or Trigger Alarm Output Manually ...
Страница 152: ...ALIEN HERO INSTRUCTION MANUAL 152 Last Revised 16 10 2013 18 4 Record Timings for 16 channels unit NYA ...
