manualshive.com logo in svg

Alien Hero ALIEN654, Руководство по эксплуатации

Поделиться
Скачать
Alien Hero ALIEN654 Скачать руководство пользователя страница 13

ALIEN HERO INSTRUCTION MANUAL

13

Last Revised 16/10/2013

No.

Name

Description

10

MENU Button

Back to the Main menu (after successful login).

11

PREV Button

Switching between single screen and multi-screen mode.

12

DIRECTION/ENTER
Buttons

Navigating between different fields and items in menus.

In Playback mode, the Up and Down button are used to speed up and

slow down the playing of recorded video.

The Left and Right button will select the recorded video of 30 reverse

and 30s forward.
In live view mode, these buttons can be used to cycle through channels.

13

PTZ Button

Enter the PTZ Control mode.

14

ESC Button

Back to the previous menu
Pressing for arming/disarming the DVR in Live View mode.

15

RESERVED

Reserved.

16

F1 Button

Selecting all items on the list when used in a list field.
In PTZ Control mode, it will turn on/off PTZ light.

17

PTZ Control Buttons

Adjusting the iris, focus and zoom of a PTZ camera.

18

F2 Button

Cycle through tab pages.

Troubleshooting Remote Control:

Note:

Make sure you have installed batteries properly in the remote control. And you have to aim the remote

control at the IR receiver on the front panel.

If there is no response after you press any button on the remote, follow the procedure below to troubleshoot.

Steps:

1.

Go to Menu > Configuration > General > More Settings by operating the mouse.

2.

Check and remember the device No. The default No. is 255. This device No. is valid for all the IR remote

controls.

3.

Press the DEV button on the remote control.

4.

Enter the device No. from step 2.

5.

Press the ENTER button on the remote.

If the remote control is operating properly, but there is still no response from the remote, please check the

following:

1.

Batteries are installed correctly and the polarities of the batteries are not reversed.

2.

Batteries are not flat.

3.

IR receiver on DVR is not obstructed.

1.3 USB Mouse Operation

A regular 3-button (Left/Right/Scroll-wheel) USB mouse can also be used with this device. To use a USB mouse:

1.

Plug USB mouse into one of the USB interfaces on the front panel of the device.

2.

The mouse should automatically be detected. If in a rare case that the mouse is not detected, the possible

reason may be that the two devices are not compatible.

The operation of the mouse:

Table 1.3 Description of the Mouse Control

Name

Action

Description

Single-Click

Live view: Select channel and show the quick set menu.

Menu: Select and enter.

Left-Click

Double-Click

Live view: Switch single-screen and multi-screen.

Содержание ALIEN654





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды