manualshive.com logo in svg

Alien Hero ALIEN654, Руководство по эксплуатации

Поделиться
Скачать
Alien Hero ALIEN654 Скачать руководство пользователя страница 80

ALIEN HERO INSTRUCTION MANUAL

80

Last Revised 16/10/2013

7. Backup

Before you start:

Please insert the backup device(s) into the DVR.

7.1  Quick 

Export

Purpose:

Export record files to backup device(s) quickly by time.

Steps:

Enter Back Up interface. Choose the channel(s) you want to back up, followed by
time period and then click

 Quick Export

 button.

Note:

The time duration of recorded files on a specified channel cannot exceed one day.
Otherwise, the message  “Max. 24 hours are allowed for quick export.” will display.
The number of channels for synchronous export cannot exceed 4. Otherwise, the
message  “Max. 4 channels are allowed for synchronous quick export.” will display.

Figure 7.1a  Quick Export Interface

Export

Go to Export interface, choose backup device and create folder name, double click it
and then click

Export

 button to start exporting.

Note:

Here you can only use a USB Flash Drive so please refer to the next section

using Normal Backup for other backup devices supported by the DVR.

Stay in the Exporting interface until all record files are exported.

Figure 7.1b   Quick Export using USB

Содержание ALIEN654





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды