5
www.observint.com
© 2019 Observint Technologies. All rights reserved.
Language
English
Functions
Brightness, sharpness, mirror, Smart IR
General
Operating Conditions
-40 °F ~ 140 °F (-40 °C ~ 60 °C), Humidity 90% or less (non-condensing)
Power Supply
12 Vdc ± 25%
Power Consumption
Max. 4.3 W
Protection Level
IP67
Material
Metal
IR Range
Up to 65 ft (20 m)
Communication
Up the coax (TVI output)
Dimensions
3.58”(d) × 3.25” (w) × 2.69” (h) (91 mm × 82.6 mm × 68.3 mm)
Weight
Approx. 0.77 lb (350 g)
Accessories
ALI-AA2 Corner mount adapter, ALI-AB1 Short Wall Mount Bracket, ALI-AB2 Wall Bracket
with J Box, ALI-AB3 Ceiling Pendant Mount Bracket, ALI-AF1 Flange Plate, ALI-AJ1 Round
Junction Box, ALI-AJ6 Mini Junction Box, ALI-AB5 Wall Mount Bracket
Cleaning Instructions
Clean the camera turret with an approved glass cleaning solution and a lint free cloth.
•
Dust can be removed from the unit by wiping it with a soft damp cloth. To remove stains, gently rub
the surface with a soft cloth moistened with a mild detergent solution, then rinse and dry it with a
soft cloth.
•
Remove all foreign particles, such as plastic or rubber materials, attached to the camera housing.
These may cause damage to the surface over time.
CAUTION
Do not use benzene, thinner or other chemical products on the camera assembly; these may
dissolve the paint and promote damage of the surfaces. Before using any chemical product,
carefully follow the accompanying instructions.
Troubleshooting
Problem
Possible Cause
Nothing appears on the screen
- Check the power connection.
- Check the video signal cable connection to the monitor.
The video image is dim or not clear.
- If the camera lens is dirty, clean it with a soft, clean cloth.
- Adjust the monitor controls, if necessary.
- If the camera is facing a very strong light, change the camera position.
- Adjust the lens focus.
The screen is dark.
- Adjust the contrast control of the monitor.
- If you have an intermediate device, set the impedance (75 Ω /Hi-Z)
properly, and check the cable connections.
The camera is not working properly and the
surface of the camera is hot.
- Verify that the camera is correctly connected to an appropriate regulated
power source.
The image on the monitor flickers
- Make sure that the camera isn’t facing direct sunlight or fluorescent light.
If necessary,change the camera position.
